Hammerhead Parts List

A good tool is always better than the sum of its parts.

Click the tab below to find specific part numbers or click on the diagram sheet to download a PDF file. If there is anything you do not see, please call 866-887-7983 for assistance. Please contact your dealer for pricing and ordering. Hammer-Head does not sell direct.

This parts list was last updated 11/30/10

COMPLETE CLEANING UNITS

PART NUMBER	DESCRIPTION
SERVICE-21	21" SERVICE UNIT COMPLETE Includes cart, 21" head, 40' cord, motor, prop, two debris bags, and truck/trailer mount with hardware (does not include battery, battery charger, or pole) See the parts diagram.
SERVICE-21-60	21" SERVICE UNIT COMPLETE W/60FT CORD Includes cart, 21" head, 60' cord, motor, prop, two debris bags, and truck/trailer mount with hardware (does not include battery, battery charger, or pole)
SERVICE-21-NM	SERVICE UNIT W/O TRAILER MOUNT Includes cart, 21" head, 40' cord, motor, prop, and two debris bags.(does not include battery, battery charger, or pole, and does not include trailer mount)
SERVICE-30	30" SERVICE UNIT COMPLETE Includes cart, 30" head, 60' cord, motor, prop, two debris bags, and truck/trailer mount with hardware (does not include battery, battery charger, or pole) See the parts diagram.
SERVICE-30-NM	SERVICE UNIT W/30" HEAD W/O MOUNT Includes cart, 30" head, 60' cord, motor, prop, two debris bags, (does not include battery, battery charger, or pole and does not include trailer mount)
SERV-CART	SERVICE UNIT CART COMPLETE Includes cart and trailer mount with hardware only (does not include battery, battery charger, or pole and does not include vacuum head) **NOTE: This is the same cart for both the Service-21 and the Service-30.
SERV-CART-NM	SERVICE UNIT CART WITHOUT MOUNT Same as above but does not include mount set. **Been in an accident and need to replace just the frame? See CART PARTS part number HH1070.
RESORT-21	RESORT UNIT COMPLETE W/21" HEAD Includes cart, 21" head, 60' cord, motor, prop, and two debris bags (Does not include battery, battery charger, or pole) NOTE: this unit does not accept truck/trailer mount system. THIS IS A NON-MOUNTING UNIT.
RESORT-30	RESORT UNIT COMPLETE Includes cart, 30" head, 60' cord, motor, prop, two debris bags (Does not include battery, battery charger, or pole) NOTE: this unit does not accept truck/trailer mount system. THIS IS A NON-MOUNTING UNIT. See the spec sheet.

MOUNT PARTS

PART NUMBER	DESCRIPTION
HH1300	COMPLETE MOUNT ASSEMBLY KIT -includes mount upright, toggle clamp latch, safety L-pin and cable, 2" hitch adapter and U-bolts. See the parts diagram.
HH1300X	MOUNT ASSEMBLY KIT WITHOUT HITCH ADAPTER-includes mount upright, toggle clamp latch, safety L-pin and cable. Effective 03/01/08 this part will no longer include the U-Bolt set,
HH1165	MOUNT TOGGLE CLAMP LATCH -includes hardware, does not include L-pin and cable
HH1175G	SAFETY L-PIN AND CABLE
HH1175	SAFETY L-PIN ONLY -does not include cable
HH1210A	U-BOLT MOUNTING SET -includes two u-bolts, four nuts and four washers
HH1210	U-BOLT ONLY -includes two nuts and two washers
HH1301	2" HITCH ADAPTER WITH U-BOLTS
HH1304	MOUNT UPRIGHT BAR ONLY -does not include hardware, clamp latch, or L-pin

CART PARTS

PART NUMBER	DESCRIPTION
HH1050	20" CART WHEEL COMPLETE -sold each Includes rim, stainless steel bearings, and solid gray tubeless tire
HH1050A	REPLACEMENT 20" INNER TUBE -sold each For older style pneumatic wheels
HH1050B	REPLACEMENT 20" TIRE - BLUE -NOT SOLID (Needs to be used with inner tube) -sold each
HH1052	STAINLESS STEEL AXLE
HH1052A	WHEEL BEARINGS -sold each These are not stainless steel. Each 20" cart wheel requires two. DISCONTINUED AS OF 10/01/2011 (see HH1052SS below)
HH1052SS	STAINLESS WHEEL BEARINGS - sold each Each 20" cart wheel requires two. NOW IN STOCK
HH1060	PERKO ON/OFF SWITCH -prewired - (On all units made before February 2007 with serial numbers starting 061228 and lower)
HH1061	BLUE SEAS MINI SWITCH -prewired - (On all units made after February 2007 with serial numbers starting 061229 and higher) **NOT A RETROFIT ITEM
HH1070	SERVICE CART FRAME ONLY - sold with axle, skids, and frame plugs- partially drilled, some drilling required - No warranty and no return on this item.
HH1075	CART LED SKID (FEET) - sold each - two required per cart.
HH1080	FRAME END PLUG SET - sold as set of six.
HH1085	CART V-TRAY PANEL SET - Plastic panels for the cart -one large one small. Includes decal. Not drilled- drilling required. Does not include hardware.
HH1085A	V-TRAY PANEL -FRONT (small panel)
HH1085B	V-TRAY PANEL -BACK (large panel w/decal)
HH1120	SOAP BOTTLE CAGE
HH1125	24" BUNGEE (long - sold each)
HH1130	18" BUNGEE (short - sold each)
HH1251	AXLE SHAFT COLLAR "WHEEL KEEPER" - sold each, stainless steel, holds wheel onto axle.
HH1275	HEAD BRACKET PAD -sold each., rubber pad for resting head on cart.
HH5055	CHEMICAL TRAY -LIGHT DUTY PLASTIC - gray
HH5055B	CHEMICAL TRAY -HEAVY DUTY PLASTIC - white - original equipment with all new units
HH5506	BATTERY BOX
HH5057	SOAP BOTTLE

COMPLETE VACUUM HEADS

PART NUMBER	DESCRIPTION
HH1310	21" VACUUM HEAD COMPLETE Includes 21" head assembly, motor, 40ft cord, prop and standard debris bag.
HH1311	21" VACUUM HEAD WITHOUT MOTOR Includes 21" head assembly only
HH1320	30" VACUUM HEAD COMPLETE Includes 30" head assembly, motor, 60ft cord, prop and standard debris bag.
HH1321	30" VACUUM HEAD WITHOUT MOTOR Includes 30" head assembly only

VACUUM HEAD PARTS

PART NUMBER	DESCRIPTION
HH1030 FR	21" VACUUM HEAD HALF -sold each, front side (decal side)
HH1030 BK	21" VACUUM HEAD HALF -sold each, back side (pole side)
HH1035 FR	30" VACUUM HEAD HALF -sold each, front side (decal side)
HH1035 BK	30" VACUUM HEAD HALF -sold each, back side (pole side)
HH1150	LARGE HEAD WHEEL -sold each, with bushing, two required per head
HH1240	LARGE HEAD WHEEL AXLE BOLT HARDWARE -sold each
HH1155	SMALL HEAD WHEEL -sold each with hardware, four required per head
HH1160	NYLON BUSHING FOR SMALL WHEEL -sold each
HH1195	BRONZE BUSHING FOR LARGE WHEEL -sold each
HH1225	POLE YOKE MOUNT SWIVEL HANDLE ONLY
HH1230	POLE YOKE MOUNT SWIVEL COMPLETE ASSEMBLY

MOTOR PARTS AND PROPS

PART NUMBER	DESCRIPTION
HH1305	40 FOOT MOTOR/CORD ASSEMBLY -does not include prop
HH1315	60 FOOT MOTOR/CORD ASSEMBLY -does not include prop
HH1000	4 BLADE PROPELLER - DISCONTINUED
HH1000G	4 BLADE PROPELLER KIT - Includes prop, prop nut, and 2 prop pins - DISCONTINUED
HH1002	2 BLADE PROPELLER - DISCONTINUED
HH1002G	2 BLADE PROPELLER KIT - Includes prop, prop nut, and 2 prop pins - DISCONTINUED
HH1003	3 BLADE PROPELLER - NEW! Universal fit for all original Hammer-Head cleaners, old and new. NOTE: This prop must be trimmed to fit an AquaVac manual or Hayward Pro manual unit. Please let your dealer know what kind of unit you have when you order, so we can send you a prop sized for your unit. Note: This prop must be trimmed for Hayward Pro and AquaVac Manual units - please specify which unit you have when you order.
HH1003G	3 BLADE PROPELLER KIT- NEW! Includes prop, prop nut, and 2 prop pins. NOTE: This prop must be trimmed to fit an AquaVac manual or Hayward Pro manual unit. Please let your dealer know what kind of unit you have when you order, so we can send you a prop sized for your unit. Note: This prop must be trimmed for Hayward Pro and AquaVac Manual units - please specify which unit you have when you order.
HH1010	PROP PIN
HH1020	PROP NUT
HH1146	STAINLESS STEEL CORD CLAMP
HH4041	HEAVY DUTY STAINLESS MOTOR MOUNT BRACKET (This bracket is included with all motor/cord assemblies)

DEBRIS BAGS

PART NUMBER	DESCRIPTION
HH1502	COARSE BAG COMPLETE W/CLEAT - 400 microns
HH1506	STANDARD BAG COMPLETE W/CLEAT -100 microns
HH1508	SUPERFINE BAG COMPLETE W/CLEAT - 80 microns
HH1510	ULTRAFINE VOLCANO BAG WITH CLEAT - 75 microns
HH1502XL	COARSE EXTRA LARGE BAG W/CLEAT
HH1506XL	STANDARD EXTRA LARGE BAG W/CLEAT
HH1508XL	SUPERFINE EXTRA LARGE BAG W/CLEAT
HH1506F	STANDARD SHORT FOUNTAIN BAG W/CLEAT
	ABOUT OUR BAGS: Authentic Hammer-Head debris bags are hand made here in the USA and are inspected prior to packaging and shipment. Each bag has a tag with the Hammer-Head name that indicates what type it is. We warranty them against defects in workmanship but not against wear and tear. Treat your debris bags with care. Dragging them on the bottom of the pool, the deck, or across the coping when lifting them out of the water can wear holes in them. Empty them frequently while vacuuming, and store them clean, dry, and out of the sunlight for the longest life.
	ABOUT BAG SIZE: XL bags are approximately two times the capacity of our normal bag and measure about 48" in length. A normal standard, superfine or coarse bag is about 24".
	ABOUT MICRON RATINGS: A micron is one millionth of a meter, or approximately .00003937 inches. The smaller the micron number, the finer the bag. As debris goes, anything below about 40 microns is smaller than the human eye can easily see. White blood cells are about 25 microns, red blood cells are 8 and bacteria generally around 2 microns. More about mirons? Click here.
	CLEATING A BAG PROPERLY: Pull bag down over raised lip on the upper part of the head with the cleat at the front. Hold bag cleat in one hand and pull the bag string firmly into the grooves on the cleat. Pull up on the bag cloth to open the bag to its full height. A properly cleated bag will not blow off during vacuuming unless the bag is overfilled.

ACCESSORIES

PART NUMBER	DESCRIPTION
HH5050	HOLSTER -MESH TOOL BAG ACCESSORY
HH1310BB1	VINYL BRUSH BRACKET - BLACK BRISTLE - FIRM
HH1310BB2	GUNITE BRUSH BRACKET - WHITE BRISTLE - SOFT
BRUSH BRACKET ATTACHMENTS ARE AVAILABLE FOR 21" HEAD ONLY


SERVICE-21 PARTS DIAGRAM SHEET Download	SERVICE-30 PARTS DIAGRAM SHEET Download

MOUNT ASSEMBLY PARTS DIAGRAM Download	RESORT UNIT BID SPEC SHEET Download