Below is a complete reference list for all Hammer•Head products and parts. If there is anything you do not see, please call 866-887-7983 for assistance. Hammer•Head does not sell direct. Please contact your dealer for pricing and ordering.
|
 |
|
COMPLETE CLEANING UNITS
|
| PART NUMBER |
DESCRIPTION |
|
SERVICE-21
|
21" SERVICE UNIT COMPLETE
Includes cart, 21" head, 40' cord, motor, prop, two debris bags, and truck/trailer mount with hardware
(does not include battery, battery charger, or pole)
See the parts diagram.
|
| SERVICE-21-60 |
21" SERVICE UNIT COMPLETE W/60FT CORD
Includes cart, 21" head, 60' cord, motor, prop, two debris bags, and truck/trailer mount with hardware
(does not include battery, battery charger, or pole) |
| SERVICE-21-NM |
SERVICE UNIT W/O TRAILER MOUNT
Includes cart, 21" head, 40' cord, motor, prop, and two debris bags.(does not include battery, battery charger, or pole, and does not include trailer mount) |
|
SERVICE-30
|
30" SERVICE UNIT COMPLETE
Includes cart, 30" head, 60' cord, motor, prop, two debris bags, and truck/trailer mount with hardware (does not include battery, battery charger, or pole)
See the parts diagram.
|
|
SERVICE-30-NM
|
SERVICE UNIT W/30" HEAD
Includes cart, 30" head, 60' cord, motor, prop, two debris bags, (does not include battery, battery charger, or pole and does not include trailer mount)
|
|
SERV-CART
|
SERVICE UNIT CART COMPLETE
Includes cart and trailer mount with hardware only (does not include battery, battery charger, or pole and does not include vacuum head) **NOTE: This is the same cart for both the Service-21 and the Service-30.
|
| SERV-CART-NM |
SERVICE UNIT CART WITHOUT MOUNT
Same as above but does not include mount set.
**Been in an accident and need to replace just the frame? See CART PARTS part number HH1070. |
|
RESORT-21
|
RESORT UNIT COMPLETE W/21" HEAD
Includes cart, 21" head, 60' cord, motor, prop, and two debris bags (Does not include battery, battery charger, or pole) NOTE: this unit does not accept truck/trailer mount system. THIS IS A NON-MOUNTING UNIT.
|
|
RESORT-30
|
RESORT UNIT COMPLETE
Includes cart, 30" head, 60' cord, motor, prop, two debris bags (Does not include battery, battery charger, or pole) NOTE: this unit does not accept truck/trailer mount system. THIS IS A NON-MOUNTING UNIT.
See the spec sheet.
|
|
|
| MOUNT PARTS |
| PART NUMBER |
DESCRIPTION |
| HH1300 |
COMPLETE MOUNT ASSEMBLY KIT -includes mount upright, toggle clamp latch, safety L-pin and cable, 2" hitch adapter and U-bolts.
See the parts diagram. |
| HH1300X |
MOUNT ASSEMBLY KIT WITHOUT HITCH ADAPTER-includes mount upright, toggle clamp latch, safety L-pin and cable. Effective 03/01/08 this part will no longer include the U-Bolt set, |
| HH1165 |
MOUNT TOGGLE CLAMP LATCH -includes hardware, does not include L-pin and cable |
| HH1175G |
SAFETY L-PIN AND CABLE |
| HH1175 |
SAFETY L-PIN ONLY -does not include cable |
| HH1210A |
U-BOLT MOUNTING SET -includes two u-bolts, four nuts and four washers |
| HH1210 |
U-BOLT ONLY -includes two nuts and two washers |
| HH1301 |
2" HITCH ADAPTER WITH U-BOLTS |
| HH1304 |
MOUNT UPRIGHT BAR ONLY -does not include hardware, clamp latch, or L-pin |
|
| CART PARTS |
|
PART NUMBER
|
DESCRIPTION |
|
HH 1050
|
20" CART WHEEL COMPLETE -sold each
Includes rim, bearings, and solid gray tubeless tire
|
|
HH1050A
|
REPLACEMENT 20" INNER TUBE -sold each
For older style pneumatic wheels
|
| HH1050B |
REPLACEMENT 20" TIRE - BLUE -NOT SOLID -sold each |
| HH1052 |
STAINLESS STEEL AXLE |
| HH1052A |
WHEEL BEARINGS -sold each
These are not stainless steel. Each 20" cart wheel requires two. |
| HH1060 |
PERKO ON/OFF SWITCH -prewired - (On all units made before February 2007 with serial numbers starting 061228 and lower) |
| HH1061 |
BLUE SEAS MINI SWITCH -prewired - (On all units made after February 2007 with serial numbers starting 061229 and higher)
**NOT A RETROFIT ITEM |
| HH1070 |
SERVICE CART FRAME ONLY - sold with axle, skids, and frame plugs- partially drilled, some drilling required - No warranty and no return on this item. |
| HH1075 |
CART LED SKID (FEET) - sold each - two required per cart. |
| HH1080 |
FRAME END PLUG SET - sold as set of six. |
| HH1085 |
CART V-TRAY PANEL SET - Plastic panels for the cart -one large one small. Includes decal. Not drilled- drilling required. Does not include hardware. |
| HH1085A |
V-TRAY PANEL -FRONT (small panel) |
| HH1085B |
V-TRAY PANEL -BACK (large panel w/decal) |
| HH1120 |
SOAP BOTTLE CAGE |
| HH1125 |
24" BUNGEE (long - sold each) |
| HH1130 |
18" BUNGEE (short - sold each) |
| HH1251 |
AXLE SHAFT COLLAR "WHEEL KEEPER" - sold each, stainless steel, holds wheel on to axle. |
| HH1275 |
HEAD BRACKET PAD -sold each., rubber pad for resting head on cart. |
| HH5055 |
CHEMICAL TRAY -LIGHT DUTY PLASTIC |
| HH5055B |
CHEMICAL TRAY -HEAVY DUTY PLASTIC |
| HH5506 |
BATTERY BOX |
| HH5057 |
SOAP BOTTLE |
|
| COMPLETE VACUUM HEADS |
| PART NUMBER |
DESCRIPTION |
| HH1310 |
21" VACUUM HEAD COMPLETE
Includes 21" head assembly, motor, 40ft cord, prop and standard debris bag. |
| HH1311 |
21" VACUUM HEAD WITHOUT MOTOR
Includes 21" head assembly only |
| HH1320 |
30" VACUUM HEAD COMPLETE
Includes 30" head assembly, motor, 60ft cord, prop and standard debris bag. |
| HH1321 |
30" VACUUM HEAD WITHOUT MOTOR
Includes 30" head assembly only |
|
| VACUUM HEAD PARTS |
| PART NUMBER |
DESCRIPTION |
| HH1030 FR |
21" VACUUM HEAD HALF -sold each, front side (decal side) |
| HH1030 BK |
21" VACUUM HEAD HALF -sold each, back side (pole side) |
| HH1035 FR |
30" VACUUM HEAD HALF -sold each, front side (decal side) |
| HH1035 BK |
30" VACUUM HEAD HALF -sold each, back side (pole side) |
| HH1150 |
LARGE HEAD WHEEL -sold each, with bushing, two required per head |
| HH1240 |
LARGE HEAD WHEEL AXLE BOLT HARDWARE -sold each |
| HH1155 |
SMALL HEAD WHEEL -sold each with hardware, four required per head |
| HH1160 |
NYLON BUSHING FOR SMALL WHEEL -sold each |
| HH1195 |
BRONZE BUSHING FOR LARGE WHEEL -sold each |
| HH1225 |
POLE YOKE MOUNT SWIVEL HANDLE ONLY |
| HH1230 |
POLE YOKE MOUNT SWIVEL COMPLETE |
|
| MOTOR/CORD ASSEMBLIES AND MOTOR PARTS |
| PART NUMBER |
DESCRIPTION |
| HH1305 |
40 FOOT MOTOR/CORD ASSEMBLY -does not include prop |
| HH1315 |
60 FOOT MOTOR/CORD ASSEMBLY -does not include prop |
| HH1000 |
4 BLADE PROPELLER |
| HH1002 |
2 BLADE PROPELLER |
| HH1010 |
PROP PIN |
| HH1020 |
PROP NUT |
| HH1146 |
STAINLESS STEEL CORD CLAMP |
| HH4041 |
HEAVY DUTY STAINLESS MOTOR MOUNT BRACKET |
|
| DEBRIS BAGS |
| PART NUMBER |
DESCRIPTION |
| HH1502COMP |
COARSE BAG COMPLETE W/CLEAT -800 microns |
| HH1506COMP |
STANDARD BAG COMPLETE W/CLEAT -200 microns |
| HH1508COMP |
SUPERFINE BAG COMPLETE W/CLEAT -150 microns |
| HH1502XLCOMP |
COARSE EXTRA LARGE BAG W/CLEAT |
| HH1506XLCOMP |
STANDARD EXTRA LARGE BAG W/CLEAT |
| HH1508XLCOMP |
SUPERFINE EXTRA LARGE BAG W/CLEAT |
| HH1504F |
STANDARD SHORT FOUNTAIN BAG W/CLEAT |
|
ABOUT OUR BAGS:
Authentic Hammer-Head debris bags are hand made here in the USA and are inspected prior to packaging and shipment. Each bag has a tag with the Hammer-Head name that indicates what type it is.
We warranty them against defects in workmanship but not against wear and tear. Treat your debris bags with care. Dragging them on the bottom of the pool, the deck, or across the coping when lifting them out of the water can wear holes in them. Empty them frequently while vacuuming, and store them clean and dry for the longest life. |
|
ABOUT BAG SIZE:
XL bags are approximately two times the capacity of our normal bag and measure about 48" in length. A normal standard, superfine or coarse bag is about 24". |
|
ABOUT MICRON RATINGS:
A micron is one millionth of a meter, or approximately .00003937 inches. The smaller the micron number, the finer the bag. As debris goes, anything below about 40 microns is smaller than the human eye can easily see. White blood cells are about 25 microns, red blood cells are 8 and bacteria generally around 2 microns. |
|
CLEATING A BAG PROPERLY:
Pull bag down over raised lip on the upper part of the head with the cleat at the front.
Hold bag cleat in one hand and pull the bag string firmly into the grooves on the cleat. Pull up on the bag cloth to open the bag to its full height.
A properly cleated bag will not blow off during vacuuming unless the bag is overfilled. |
|
| ACCESSORIES |
| PART NUMBER |
DESCRIPTION |
| HH5050 |
HOLSTER -MESH TOOL BAG ACCESSORY |
| HH1310BB1 |
VINYL BRUSH BRACKET - BLACK BRISTLE - FIRM |
| HH1310BB2 |
GUNITE BRUSH BRACKET - WHITE BRISTLE - SOFT |
| **BRUSH BRACKET ATTACHMENTS ARE AVAILABLE FOR 21" HEAD ONLY** |
|
|
